When the user uses the hoses, after long-term use, the hoses will have various problems such as aging and wear. At this time, we need to replace the hoses of the equipment/machinery.

Replacing the hydraulic hose is a step that requires careful operation. The following are some basic steps and precautions:

1. Preparation:

Prepare the required new hydraulic hose, joints, seals and other tool materials.

Ensure that the working environment is clean and tidy to prevent dust and debris from entering the hydraulic system.

Make sure the hydraulic system is shut down and the pressure is fully released.

2. remove the old hose:

Remove the old hose carefully, taking care to avoid injury, because the hydraulic hose may be prestressed.

During disassembly, do not allow dust or debris to enter the hydraulic circuit.

3.install new hose:

Clean joints and mounting surfaces to ensure they are free of oil and debris.

Install the new hose on the joint to ensure that the installation is firm and not loose.

Use seals to ensure that joints are well sealed to prevent leaks.

4. Inspection and testing:

After the installation is complete, carefully check the installation of the hydraulic hose to ensure that there is no leakage, no distortion and other problems.

Start the hydraulic system, carry out no-load test, and observe whether the hose has abnormal vibration or leakage.

Carry out full load test to ensure that the hose runs stably under normal working conditions.

5. Record and maintenance:

Record the date and model of the hose replacement for future maintenance and management.

Check the status of the hydraulic hose regularly to find and deal with potential problems in time.

Please note that different types of hydraulic hose may have different installation and replacement requirements, so in actual operation, you can refer to the operation manual of the relevant products of Suitian or consult the professional and technical personnel of Guangzhou Rong Ming Hydraulic Equipment Co., LTD., the authorized distributor of Suitian hose.

At the same time, safe operation is very important, be sure to comply with the relevant safety regulations and operating procedures.